User`s manual

Section 4: Configure Menu, Part II - Instrument .con File
39
Old Style SBE 911 Configuration
Listing of channels at bottom of
dialog box reflects this choice.
• 3 (no redundant T or C sensors)
• 4 (single redundant sensor
configuration)
• 5 (dual redundant sensor
configuration)
NMEA - Select if NMEA
interface option installed in
SBE 11 and connected to
NMEA navigation device.
If selected, SEASAVE
automatically adds current
latitude, longitude, and
universal time code to data
header. Select NMEA
(Lat/Lon) Interface in
SEASAVE’s Configure
menu to control how
Lat/Lon data is
incorporated.
Select to match your
SBE 9 (8, 12, 24, or 33 1/3
scans per second).
Click to modify list of sensors (after number of
frequency channels and voltage words have
been specified above). Data Format Definition
dialog box with a list of sensors appears.
Select sensors.
IEEE-488 (GPIB) or
RS-232C, based on how
SBE 11 is connected to
computer.
Listing of channels at
bottom of dialog box
reflects this choice.
Click to return to Examine / Change
Instrument Configuration File dialog
box. In that dialog box, click Change
Calibration Coefficients to view,
modify, or enter coefficients.
Select from standard or high resolution Digiquartz, with or without
temperature compensation, or strain gauge. If pressure sensor calibration
sheet contains only C, D, and T0 coefficients, you do not have temperature
compensation. If pressure sensor calibration sheet contains C1, C2, C3, D1,
T1, T2, and T3 coefficients, you do have temperature compensation. CTDs
manufactured after December 1988 included a high-resolution period
counter for pressure channel. If you have this option, configuration sheet will
indicate high-resolution pressure.