User`s manual

Section 4: Configure Menu, Part II - Instrument .con File
36
B. Click Change Instrument Configuration to change or set up the
configuration of the instrument (number and type of sensors, channel
assigned to each sensor, etc.). The Instrument Configuration dialog
box appears. This dialog box is different for each instrument.
An example is shown below for the SBE 19.
All Instrument Configuration dialog boxes include:
• List of instrument configuration options at the top
(instrument-specific), such as number of auxiliary channels,
pressure sensor type, addition of Surface PAR and NMEA to the
CTD data string, etc.
• Modify Data Format Button and List of Channels and
Assigned Sensors: This list reflects the options selected at the
top (for example, the number of voltage sensors listed agrees
with the user selection for External voltage channels). Click the
button to modify the list of sensors assigned to the channels.
Make the desired selections and click OK.