User`s manual

Section 4: Configure Menu, Part II - Instrument .con File
34
New Style SBE 49 FastCAT Configuration
Number of samples to average per scan. SBE 49 samples at 16 Hz
(0.0625 seconds), averages data, and transmits averaged data real-
time. Must agree with number programmed into SBE 49 with NAVG=
command; see reply from status command (DS).
Click a sensor
and click Modify
to change
calibration
coefficients for
that sensor.
New to create new
.con file for this CTD.
Open to select
different .con file.
Save or Save As to
save current .con file
settings.
Opens a .txt file (for viewing
and printing only; cannot be
modified) that shows all
parameters in .con file.
Click to exit dialog box. If you made changes and did
not Save or Save As, SEASAVE asks if you want to
save changes.