User's Manual

SYSTEM REQUIREMENTS
Please be sure that you meet all of the system requirements below to avoid difficulties during
- 100% PC Compatibles
- Windows® 2000, XP, Vista and 7
- Available USB Port
INSTALLATION
1. Plug the USB connector of your USB Dongle into an available USB port on your
device(PC/STB/TV).
2. Turn on your device(PC/STB/TV).
3. Your device(PC/STB/TV) will detect and install the necessary drivers automatically.
4. Your new USB Dongle is now ready to be used.
PAIRING PROCEDURE
1. Turn ON the device (PC/STB/TV) and press a side button on the USB Dongle for a short
time. (Red LED will blink)
2. Press Pairing button on the remote control
3. Red LED will be turned OFF within few seconds after the completion
ELECTRICAL REQUIREMENTS
- Protocol: 2.4 GHz IEEE 802.15.4
- Interface: USB (full speed)
- Operating voltage range: DC 4.75 ~ 5.25 V
- Operating current: Max 100mA, 5V DC
- Operating range: 10 meters
ENVIRONMENTAL REQUIREMENT
- Ambient temperature and humidity (operation)
* Temperature: 0 ~ 40℃
* Humidity: 10%~85% RH
- Ambient temperature and humidity (storage)
* Temperature: -20 ~ +60℃
* Humidity: 10%~95 % RH
SEJIN ELECTRON INC.