Manual

Reexion Filter Technical Manual
Assembling Your Reexion Filter
3. Fix the support rod to the
Reexion Filter by screwing
it into the socket on the bottom
edge. Tighten the nut using the
spanner supplied in the box.
4. Fix the support rod, with the
attached Reexion Filter, by
pushing the support rod down
into the socket on the stand clamp
and tighten it in place with the metal
handle on the block.
5. You can now play with the positioning
of the mic (both vertically and horizontally),
and the height of the Reexion Filter to
get the optimum position for recording.