User manual
2. Bluetooth operating function: 
1)  (MUT) 
Under the Bluetooth displaying mode, press this button for switching 
to phone calling mode, then you can choose the number by 0-9 button. 
Press to release the call. Under the phone calling mode, press to repeat 
the last call if no  numbers were  put in.  If there is a call,  press  this 
button to answer, press and hold to answer the call in private. 
2)  (CLK) 
Under the  phone  calling mode, press  this  button to  cancel/delete  the 
last number entered. If there is an incoming call, press it to reject the 
call. During the call, press this button to end the call. 
 3) 1/  button 
Under  the  Bluetooth  displaying  mode,  press  this  button  to  pause. 
Under the phone calling mode,  press this button means to choose 
number 1. 
 4) 2/INT button 
Under the phone calling mode,  press this button means to choose 
number 2. 
5) 3/RPT button 
Under the phone calling mode,  press this button means to choose 
number 3. 
6) 4/RDM button 
Under the phone calling mode,  press this button means to choose 
number 4. 
7) 5/DIR-/* button 
Under the phone calling mode,  press this button means to choose 
number 5, press and hold for choosing *. 
8) 6/DIR+/# button 
Under the phone calling mode, press this button means  to choose 
number 6, press and hold for choosing #. 
9)  /7 button 
Under the phone calling mode,  press this button means to choose 
number 7. 
10)  /8 button 
Under the phone calling mode,  press this button means to choose 
number 8. 
11) BND/9 
Under the phone calling mode,  press this button means to choose 
number 9. 
12) 0 button: 
Under the phone calling mode,  press this button means to choose 
number 0. 
 Remark: 
1. The Bluetooth function of the phone should be  matched with this 
player, and then it can be switched to Bluetooth mode, the Passkey for 
setting Phone match is “0000” by default.  
2. Before matching the player to the phone, you need to switch on the 
Bluetooth function of the player. 
3. Under the power  off status (Bluetooth on), incoming calls will 
activate  the  unit  and  show  the  incoming  phone  number in  the  LCD 
screen. After finishing the call, it will automatically switch to the 
previous status.  
Registration 
To register your product visit: Sondpex.com/register 
Thank you for purchasing a Sondpex product. We pride ourselves on 
the quality and reliability of all our electronic products but if you ever 
need service or have a question, our customer service staff stands ready 
to help. Contact us at Sondpex.com 
Registering  your  product  will  serve  as  proof  of  purchase  in  case 
anything ever happens to it. Registering will allow us to contact you in 
the  unlikely event  a safety notification is  required under the  Federal 
Consumer Safety Act. 
Electrical Connection Warning  
Many  vehicles  are  pre-fitted  with  ISO  connectors  behind  the  dash, 
including all the electrical  cabling for a car radio. In such cases, the 
connections fitted to the vehicle can be directly plugged into the car radio 
connectors. Should your car  not be pre-fitted with  these  connectors, we 
strongly  advise  you to obtain the ISO wiring loom fitted  with  the  male 
connector for connection to your car radio either from a specialist shop or 
from the  concessionaire  for  your  vehicle.  Once  obtained,  you  will  only 
need to connect your loudspeakers and the power  supply to the  ISO 
connector. 
CAUTION: 
  INCORRECT WIRING OR OPERATION WILL VOID THE 
WARRANTY OF THIS UNIT. 
9 
10 







