Product data

64 IBM Systems Director Management Console: Introduction and Overview
򐂰 Creates default profiles based on Virtual Server current configuration read
from PHYP, as IVM does not support profiles.
4.2.3 Messages
By default, all success and failure messages are listed in the Event Log page.
The Event Log page is available under the System Status and Health category in
the navigation area. Check the Event Log page for the success or failure of the
transition process. When the transition completes successfully, the following
message is posted in the Event Log:
The IVM to SDMC transition completed successfully.
The Status Manager displays the Alert and the Resolution messages. Clicking
the Health and Summary link under the System Status and Health category
shows the messages in the Status Manager. An Alert message (error) is
displayed first, followed by a Resolution event.
An alert message is displayed in the Status Manager to flag a problem. A
Resolution event is received by the Status Manager when the problem is
resolved. Thus, the Resolution event removes the corresponding alert that it has
resolved from the Status Manager.
Table 4-1 shows the Alert and Resolution events related to the IVM to SDMC
transition.
Table 4-1 Status Manager Error/Resolution messages
Alert Resolution
Virtual I/O Server Slot Range Adjustment
Failed (Error).
Virtual I/O Server Reactivated & Slot
Adjustment Completed Successfully
(Resolution).
The Virtual I/O Server Slot adjustment did
not complete successfully. You have to
reactivate the Virtual I/O Server Virtual
Server before attempting LPM or AMS
operations.
The Virtual I/O Server Slot Adjustment
completed successfully.