Product data

368 IBM Systems Director Management Console: Introduction and Overview
IBM Power Systems management commands
This section lists the Power Systems management commands (the ones in the
psm-path) not covered by the IBM HMC Command-Line specification at the time
of writing. The actual HMC Command-Line specification can be found at the
following address:
http://www14.software.ibm.com/webapp/set2/sas/f/hmcl/resources.html
For a full explanation of the command options, please see the man pages or use
the -?, -h, or --help options.
Table A-1 shows information about the chtunecfg command.
Table A-1 chtunecfg command
Table A-2 shows information about the impdata command.
Table A-2 impdata command
Command chtunecfg
Definition Performs operations on an SRIOV tuning buffer on a
managed system.
Syntax smcli chtunecfg
-m <managed system>
-r sriov
--id <tuning buffer id>
-o a | c
[-f <file> | -i <data>]
[--help]
Command impdata
Definition This command imports the HMC configuration into the
SDMC. It is used in the HMC to SDMC transition.
Syntax smcli impdata
{ -f <file> | { -h <HMC hostname|ipaddress>
-u <HMC user ID>
[--passwd <HMC user password>]}}
Example Importing the data from file:
smcli impdata -f /tmp/hmcdata
Importing the data from an HMC:
smcli impdata -h hmc1.itso.ibm.com -u hscroot