Product data
366 IBM Systems Director Management Console: Introduction and Overview
Problem Repair
You can execute a repair from the Problem Information page, which
guides you to through the procedure to replace the FRUs. You can
do some of the repairs concurrently.
List Running Power System Repairs (Resume Repair)
Displays a list of Guided Repair processes that are currently running
on the SDMC. Click a process to continue it. Currently running
processes are removed if the SDMC is restarted.
Identify LED
Displays a list of enclosures and FRUs. You can then
activate/deactivate the LED on supporting FRUs and enclosures.
LED Lamp Test
Enables all LEDs on the managed system for a few minutes.
System Attention LED
Deactivates the System Attention LED.
14.9.1 Differences from HMC
SDMC does not have the ability to disconnect and resumes user sessions like
HMC does. You can resume a Guided Repair function using the List Running
Power System Repairs task. Click any one of the listed processes to resume that
process.
You can also initiate a R&V process from the Recommendations tab of the
Problem properties window. Click the Problems link at the top of the web
interface and you should see a list of problems. Click any of the problems and
you should see the Problem properties window. Click the Recommendation tab,
and click the Repair button. The R&V process starts and exchanges FRUs to fix
the problem.