Product data

320 IBM Systems Director Management Console: Introduction and Overview
9. The final page (Figure 12-14) shows the summary of all the configuration
inputs entered during the setup. Review the information and click Finish.
Figure 12-14 Summary page
While high availability is being configured, Systems Director is shut down on both
cluster nodes. During this time, information is copied from the primary to the
secondary node. The speed of your network determines how long the replication
takes.
To monitor the status of the configuration, perform the following steps:
1. Start an SSH session from an SSH client to connect to either node. Log in as
sysadmin.
2. Run smhastatus -r. This command displays the configuration status as it
proceeds.
3. Press Ctrl+C to exit smhastatus.