Product data

Chapter 10. Command-line interface 287
10.3 HMC commands not supported on the SDMC
Table 10-4 lists the HMC commands listed that are no longer supported on the
SDMC, because of the differences between HMC and SDMC. Some of the
functionality is still supported through other SDMC commands, which is also
reflected Table 10-4.
Table 10-4 HMC commands not supported by the SDMC
rmsysconn Removes or resets a connection from the
SDMC to a managed system or a
managed frame.
The -o remove option is no longer
supported. Use the smcli rmsys
command instead.
rmsysplan Removes a system plan file from the
system plan file directory on the SDMC.
No change.
rmvterm Forces the closure of a virtual terminal
session for an AIX, Linux, or virtual I/O
server.
No change.
rsthwres Restores the hardware resource
configuration of partitions in the
managed system.
No change.
rstprofdata Restores profile data for the managed
system from a backup file.
No change.
startdump Initiates a dump on the managed system
or the managed frame.
No change.
updlic Updates Licensed Internal Code (LIC) on
the managed system, managed frame,
or on all managed frames that contain
High Performance Switches.
No change.
viosvrcmd Issues an I/O server command-line
interface (ioscli) command to a virtual
I/O server.
This command must be run without the
smcli prefix.
vtmenu Interactive menu with which you can get
a virtual terminal session for an AIX,
Linux, or virtual I/O server.
This command must be run without the
smcli prefix.
HMC command Usage of command Changed
HMC command SDMC replacement
bkconsdata No replacement available. Done through backup.