Product data

Chapter 10. Command-line interface 285
lslock Lists which SDMC owns the lock on the
managed frame.
No change.
lslparmigr Lists partition migration information. No change.
lslparutil Lists utilization data collected for a
managed system and the SDMC.
򐂰 The new states primary_state and
detailed_state are added. These
attributes are listed by default
򐂰 The old state attribute is displayed
only when queried with the -F option.
򐂰 The -r hmc option is not supported.
lsmemdev Lists block storage devices that can be
used as reserved storage devices for the
managed system.
No change.
lsmemopt Lists information, including status and
progress information, about the most
recent memory optimization operation
that was started on the managed system.
No change.
lspwrmgmt Lists the power management settings for
the managed system.
No change.
lsrefcode Lists reference codes for the managed
system or for the partitions in the
managed system.
No change.
lsstat Lists statistics collected for a managed
system.
No change.
lssvc Lists the settings for a service, such as
SNMP, on the SDMC.
No change.
lssyscfg Lists the attributes of partitions, partition
profiles, or system profiles for the
managed system.
򐂰 The new states primary_state and
detailed_state are added. These
attributes are listed by default
򐂰 The old state attribute is displayed
only when queried with the -F option.
lssysconn Lists connection information for all of the
systems and frames managed by the
SDMC.
No change.
lssysplan Lists the system plan files in the system
plan file directory on the SDMC.
No change.
HMC command Usage of command Changed