Product data

284 IBM Systems Director Management Console: Introduction and Overview
cpdump Copies managed system dumps and
managed frame dumps from the SDMC
to DVD or a remote FTP site.
No change.
deploysysplan Deploys a managed systems partition
plan from a system plan file.
No change.
dump Sets the system dump parameters for the
managed system.
No change.
getdump Off loads a dump from the managed
system or the managed frame to the
SDMC.
No change.
getriotopology Shows the topology of the RIO cabling. No change.
installios Installs the Virtual I/O Server. No change.
lpar_netboot Retrieves the MAC address and physical
location code from network adapters for
a partition or instructs a partition to
network boot.
No change.
lpcfgop Clear or dumps partition configuration
data on the managed system.
No change.
lscod Lists Capacity on Demand information
for the managed system.
No change.
lsdump Lists the dumps that are available for the
managed system.
No change.
lsfru Lists selected service processor
field-replaceable unit (FRU) information
for the managed system.
No change.
lshwinfo Lists environmental information, such as
input power levels, for the managed
frame.
No change.
lshwres Lists the hardware resources of the
managed system.
No change.
lsled Lists LED information for the managed
system.
The man page for this command has to be
run as man psm.lsled.
lslic Lists Licensed Internal Code (LIC) levels
installed, activated, and accepted.
No change.
HMC command Usage of command Changed