Product data

Chapter 9. IBM Systems Director Management Console management 269
Here are the available trace levels:
򐂰 Severe
򐂰 Warning
򐂰 Info
򐂰 Fine
򐂰 Finer
򐂰 Finest
By default, the log entries with Severe and Warning trace levels are logged both
in the trace logs and the error logs.
9.4.3 Audit logs
Audit logs are logs that record all the information about operations performed
using the SDMC. This log information is logged into the
/var/hsc/log/iqyylog.log file in the binary format. The audit information is
available on the GUI in the Event Log page. You can launch the Event Log page
by clicking the Common Task drop-down menu in the Resources tab of the
Welcome page.
An audit log entry contains the time stamp, the user name, and the task being
performed. When a user logs in to the SDMC locally or from a remote client, the
information is also recorded in this file. For a remote login, the client host name
or IP address is also captured as part of the audit logs.
9.4.4 Using pedbg
You have to send the Product Engineer (PE) debug data to IBM Remote Support
from the SDMC connected to servers with problems using the pedbg command.
The command provides debug tools for the Product Engineer or support
personnel for capturing the PE debug data. Only the pe predefined user can
execute this command.
Maximum number of
historical files
Changes the maximum number of historical or rotated
log files that you want to retain in the file system.
Formatter name Changes the formatter to change the format of the log
information in the log file.
Trace Detail Levels You can enable or disable logging for individual
components or managers in SDMC and also define their
trace levels.
Setting Description