Product data

246 IBM Systems Director Management Console: Introduction and Overview
Firewall
After selecting a DHCP or static IP address, the Firewall menu opens, where you
can select which ports are allowed for the interface and which are not. You can
restrict for which hosts traffic over a given port is allowed. Table 9-3 provides a
list of the standard ports that are available for configuration with the application
that corresponds to it and if it is allowed by default.
Table 9-3 Table of ports for the SDMC firewall
Recommendation: For the firewall settings, leave them at their defaults for
the appliance. You can enable ports without harm if you have to, but if you turn
off a port that is enabled by default, that action can interfere with the standard
operations of the SDMC.
Application Port(s) Allowed
Northbound remote interfaces
default JMS ports
61616:TCP,61617:TCP Yes
Common Information Model (CIM)
server ports
15988:TCP,15989:TCP Yes
Secure Shell 22:TCP Yes
Simple Network Management
Protocol
162:TCP,162:UDP No
Service Location Protocol 427:TCP,427:UDP Yes
Microsoft® SQL Server Database 1433:TCP No
Oracle Database 1521:TCP No
Apache Derby Database 1527:TCP Yes
IBM Systems Director Interprocess
Communication
2033:TCP,4066:TCP Yes
Smcli command-line interface 2044:TCP No
File Transfer Protocol 20:TCP,21:TCP No
Trivial File Transfer Protocol 69:TCP No
Serial Attached SCSI Switch 6641:TCP No
Common Information Model (CIM)
Listener
6988:TCP,6989:TCP Yes
IBM Systems Director Console
HTTPS Access
8422:TCP Yes