Product data

214 IBM Systems Director Management Console: Introduction and Overview
3. Enter a name for the group and, optionally, a description on the Name page
and click Next. On the Type and Location page, you can set the type of the
group, either as Static or Dynamic. Static groups contain systems that are
selected at the time of group creation and do not change. Dynamic groups
contain systems that match defined conditions, such as State. For the type,
Any has to be selected. The Location of the group to be created can be either
Groups or sysadmin, as shown in Figure 9-9.
Figure 9-9 Group Editor Wizard: Type and Location