Product data

140 IBM Systems Director Management Console: Introduction and Overview
If you would like to add a Logical Host Ethernet Adapter port to the partition,
check the box next to the desired adapter listed under Host Ethernet Adapter.
The validation check of Live Partition Mobility will note this setting because it
is considered a physical adapter for this purpose. This configuration is
different from the HMC configuration, but much easier to do because there is
no additional information to enter: Just click and you are set.
If you want to remove an adapter, check the check box next to the adapter
and click Remove.
8. On the Storage tab, there are now two options offered (Figure 8-8). The first
option offers configuration as it was on the Hardware Management Console,
shown here as “No, I want to manage the virtual storage adapters for this
server.” This option allows for manual creation of adapters and thus full
control of adapter and slot definitions on the Virtual Server as well as their
connecting adapters on the Virtual I/O Servers.
Figure 8-8 Create Virtual Server: Manual storage allocation