Product data

104 IBM Systems Director Management Console: Introduction and Overview
6.1.5 Launch Advanced System Management page
You can open the Advanced System Management Interface (ASMI) page for a
Power Unit by right-clicking the Power Unit and selecting Operations  Launch
Advanced System Management (ASMI). For further instructions, refer to
Chapter 13, “Advanced System Management Interface” on page 325.
6.1.6 Power Off Unowned IO Units page
An unowned Power Unit can be powered off by right clicking the Power Unit and
selecting Operations  Power Off Unowned IO Units. The Power Off
Unowned IO Units page opens (Figure 6-6) and prompts you to continue. If you
click OK, then the unowned Power Units will be powered off.
Figure 6-6 Power Off Unowned IO Units page
6.1.7 Rebuild page
You can rebuild the SDMC internal representation of a Power Unit by right
clicking the Power Unit and selecting Operations  Rebuild. The Rebuild page
opens (Figure 6-7) and prompts you to continue. If you click OK, then the Power
Unit will be rebuilt, which can take several minutes, during which no other task
can be performed.
Figure 6-7 Rebuild of a Power Unit