User's Manual
4
BLUETOOTH
PAIRING
Pairing establishes a unique communication connection between the unit and
your Bluetooth device. Once paired, you will be able to stream audio
wirelessly to the iZBT5.
1. Turn on your Bluetooth device and make it
“discoverable” by turning on Bluetooth mode
(check in Options or Settings).
2. Press and release the Power Button to turn
on the iZBT5. The first time the unit is turned on
it will enter auto pairing mode: ascending tones
will sound and the indicator light on the front of
the unit will flash red while the unit attempts to
pair. “iHome iZBT5” should appear on your
device’s menu. Select “iHome iZBT5” on device
to begin/complete pairing. If your device asks for
a password, enter 1234 on the keyboard of your
device. A tone will sound and the red indicator
will glow solid. If no device is paired within 3
minutes, the unit will revert to its previous state.
3. T
o pair with a dierent Bluetooth device, or at a
dierent time, make sure unit is powered on, then
press and hold the
Bluetooth
Button (located on
back of the unit) for 2 seconds. Select “iHome
iZBT5” on device to begin/complete pairing.
The next time you power on the unit it will
automatically link with the previously paired device
as long as that device is still within range (about 33
feet). To clear/reset Bluetooth, press and hold the
Bluetooth button for 10 seconds.
iHome iZBT5