User's Manual

SETTING THE TIME:

BLUETOOTH TIME SYNC & MANUAL TIME

SETTING

BLUETOOTH TIME SYNC

This unit is equipped with Bluetooth time sync. By default, the unit will

sync to the time on a paired Bluetooth device (when it is within Bluetooth

range of 33 feet) at 3AM each day. This is useful for automatic time

adjustment from Standard Time to Daylight Saving Time and back. To turn

this feature OFF, press and hold the Time Set Button for 10 seconds.

“TS:ON” will appear in the display, indicating time sync is ON. Press the + or

– Buttons to toggle display to “TS:OFF”, then press the Time Set Button to

exit. See page 9 for information on pairing your Bluetooth device.

SETTING THE TIME MANUALLY

1. Press and hold the Time Set Button on the back of the unit for 3 seconds

. The TIME will ﬂash on the display.

Press the + or – Buttons to set the correct time (hold for rapid

adjustment). Make sure to set the correct AM or PM time. (The PM

indicator appears to the right of the time display; there is no AM

indicator.)

2. Press and release the Time Set Button to conﬁrm the current time

setting. The YEAR will ﬂash on the display. Press the + or – Buttons to

set the correct year.

3. Press and release the Time Set Button to conﬁrm the current year

setting. The DATE will ﬂash on the display. Press the + or – Buttons to

set the correct month and day (hold for rapid adjustment).

4. Press and release the Time Set Button to conﬁrm the current date

setting. Two beeps will sound to indicate time setting mode is complete.

NOTE: The display can be set to standard 12 hour time (AM and PM) or

to 24 hour time. To toggle between 12 and 24 modes, press and release

the Alarm or Alarm Button located on top of the unit at any

time while display is ﬂashing during manual time setting mode.