User's Manual

BLUETOOTH (continued)

3. T

o pair with a dierent Bluetooth device, or at a

dierent time, make sure unit is powered on, then

press and hold the

Bluetooth Pairing

Button

(located on back of the unit) for 3 seconds. Select

“iHome iZBT10” on device to begin/complete

pairing.

The next time you power on the unit into Bluetooth mode, it will

automatically link with the previously paired device as long as that device

is still within range (about 33 feet). To clear/reset Bluetooth, press and

hold the Bluetooth button for 10 seconds.

PLAYING AUDIO VIA BLUETOOTH

1. Press and release the Power Button to turn on the iZBT10.

2. Press and release the Mode/Call Button as needed until “PHONE”

appears on the display, indicating Bluetooth mode.

3. Press and release the Play/Pause/Presets Button to play or pause

audio. Press the + Button to skip to the next song, press the – Button to

return to the start of the current track or go to the previous track

(depending on where you are in the track).

4. Press and release the or Button to adjust speaker volume. You can

also adjust the output volume on your Bluetooth device.

5. When done listening, press and release the Power Button to power o the

unit.

USING THE SPEAKERPHONE

Unit must be powered ON, paired with a Bluetooth-enabled phone and in

Bluetooth (PHONE) mode to use the speakerphone feature. When a call

is received, current audio is paused.

1. Press and release the Mode/Call Button to answer or end a regular

call. Press and hold to reject a call.

2. Press and release the Mode/Call Button to place a current call on

hold and answer a new call (call waiting) and to switch between 2 calls.

When a call is on hold, press and hold the Mode/Call Button to end

the current call and return to the waiting call.

mode

3 Sec

iHome iZBT10