User's Manual

9
English
Wi-Fi Network Setup
If you have an iPod touch, iPhone, or iPad with iOS 4.0 or later, we
recommend that you use our free iHome Connect app for the quickest
Wi-Fi network setup experience.
To connect your iW2 speaker to a Wi-Fi network using an iOS device,
follow these steps:
1. Connect AC power and power ON iW2 speaker.
1. Dock your iOS device to the iW2 using the included iPod USB sync
cable.
2. Download our free iHome Connect app from the App
Store and launch the app.
3. Select your preferred Wi-Fi network from the list of available
networks and enter password if prompted.
Note: Connecting to a network may take up to 60 seconds. If network
connection is unsuccessful reset the unit or disconnect your iOS device
and reconnect and repeat the above steps.
4. Rename your iW2 speaker and press ‘Save’ (optional).
Success!
1. Verify that the Network Status LED is green to confirm if the iW2 is
successfully connected to a network.
2. Disconnect from “iHome Setup ######” from your Wi-Fi network
setting and connect your Mac/PC or iOS device to the same network
you connected the iW2 speaker.
3. Keep reading to learn how to use the iW2 and control your iTunes
and iOS audio content.
Note: To begin using AirPlay wireless streaming, your AirPlay source
devices must be connected to the same Wi-Fi network that the iW2
speaker is connected to.
Option A - Connecting with your iPod touch, iPhone, or iPad (Recommended)
Problem?
Reset the iW2 Speaker:
- Unplug & reconnect the AC power jack from back of the iW2
speaker
- Press & hold power button (3 seconds)
- Repeat iW2 Network Setup process if necessary
- See Troubleshooting on page 13-16 for other tips.
Connected Not Connected
aux-in iPod dock
network setupstatus
12V 3A
network setup
status
aux-in iPod dock
network setupstatus
12V 3A
network setup
status
10:09 PM
Livingroom Speaker
Name
SaveCancel
Q W E R T Y U I O P
A S D F G H J K L
Z X C V B N M
Wi-Fi
Name
Your Wi-Fi Network
iHome iW2 2E33
Model: iHome iW2 • Firmware: 31.1.0
How to use AirPlay
About iHome Connect
10:09 PM
Wi-Fi
Name
Not Connected
iHome iW2 2E33
Model: iHome iW2 • Firmware: 31.1.0
How to use AirPlay
About iHome Connect
10:09 PM
Wi-Fi Networks
10:09 PM
Your Wi-Fi Network
Choose a Network for iW2...
Other Wi-Fi Network
Settings
Other Wi-Fi Network
Other Wi-Fi Network
Other Wi-Fi Network
Connect
1
2
3
4
Choose your Wi-Fi network from the available networks
and wait as the iW2 attempts to connect.
This name will be displayed when selecting your
speaker from a list of available AirPlay devices.
30s
aux-in
battery
off | on
iPod dock
power reset network setupstatus
aux-in iPod dock
network setupstatus
12V 3A
12V
press & hold power button (3 seconds)
to power ON iW2