User's Manual

To power the iW2 speaker ON:

1. Plug AC adaptor into the iW2 speaker, and plug into a live AC wall outlet.

2. Press & hold the Power button (3 seconds) to power the unit ON.

Note: Allow 20 seconds for the speaker to startup before interacting with the iW2 speaker.

3. Press the Power button to switch between power ON and Standby mode.

The iW2 speaker will power ON to AirPlay mode.

English

Getting Started

Master Power

The iW2 has a master power mode control interface to power the unit ON or OFF, help conserve energy, and reboot the iW2 speaker. In

order for the iW2 speaker to power ON, the unit must be connected to a AC outlet.

Master Power ON - Press & hold Power Button (3 seconds) to boot-up and activate your iW2 speaker.

Master Power OFF - Press & hold Power Button (3 seconds) a second time to power the iW2 speaker OFF, conserver energy, and reset the

unit.

Note: If the iW2 is in the Master Power OFF state the iW2 will not support iPad/iPod/iPhone charging, remote control commands, AirPlay,

network setup, nor Firmware Updates.

Powering your iW2 speaker ON

Just like your computer, it is sometimes necessary to reset the iW2 speaker to make sure the unit is working properly. To reset and reboot the

iW2 speaker:

1. Unplug AC adaptor from the iW2 speaker.

2. Press & hold the Power button (3 seconds) to power the unit ON.

Note: Allow 20 seconds for the speaker to startup before interacting with the iW2 speaker. The iW2 will store your network settings and

automatically reconnect to your network if it is detected after being reset or unplugged from AC power.

Reseting your iW2 speaker

aux-in iPod dock

network setupstatus

12V 3A

12V

outlet

1 2

allow 10 seconds to allow system to startup