User's Manual

12
English
Questions? Visit www.ihomeaudio.com
Problem Solution
I am unable to connect the iW1 to
my home Wi-Fi network.
I’ve successfully connected the iW1
to my home network, but I cannot
select the iW1 speaker from iTunes
or my iOS Device.
I’ve selected the iW1 speaker as my
AirPlay audio source, but I do not
hear any music.
Verify that your Wi-Fi network is functioning.
Move the iW1 closer to your network access point; the Wi-Fi
signal is weak or the iW1 is out of range of your Wi-Fi network.
iW1 Hardware Reset:
- Unplug the AC jack/remove the iW1 from the charging base.
- Slide the rear Power Switch to the OFF and then ON position.
- Reconnect AC jack, place iW1 on charging base and wait 30 sec.
for the iW1 speaker to restart.
The iW1 speaker must be on the same Wi-Fi network as your
AirPlay source.
Verify you have the latest version of iTunes and/or iOS.
Try restarting iTunes or your iOS device.
Note: The original iPhone, iPhone 3G, and iPod touch (1st gener-
ation) do not support AirPlay.
Verify that the volume is not muted or set to 0.
Verify that there is not another iTunes library or iOS device
connected to the iW1 speaker.
Try restarting iTunes or your iOS device.
1.
2.
3.
Verify that the adaptor is connected and the power outlet is
always ‘live’ (not controlled by a wall switch).
iW1 Hardware Reset:
- Unplug the AC jack/remove the iW1 from the charging base.
- Slide the rear Power Switch to the OFF and then ON position.
- Reconnect AC jack, place iW1 on charging base and wait 30 sec.
1.
2.
1.
2.
3.
1.
2.
3.
The iW1 doesn’t respond or doesn’t
turn ON.
Troubleshooting