User's Manual

7
SETTING AND USING THE ALARMS
(Continued)
REVIEWING, ARMING/DISARMING AND RESETTING THE ALARM
Press and release the Alarm Button at any time to review the current alarm
settings. To toggle the alarm on or o, press the Alarm Button as needed.
When the alarm icon is displayed, the alarm is armed/on.
Press the Power Button or Alarm Button when the alarm is sounding to
reset it to come on again at the same time the next scheduled day. (For
example, if your alarm schedule is set to Wake Weekday and you reset the
alarm on Friday, it will come on again on Monday, not on Saturday.)
CHARGING an iPhone, iPod or Apple
Watch™
While the dock accommodates most cases, you may need to remove
your case for proper docking.
Gently dock your iPhone or iPod into the flexible Lightning dock located
on the top of the unit. While your iPhone/iPod is docked in the unit and
the unit is connected to AC power, it recharges (until fully charged).
Note: Please make sure your iPhone/iPod is properly docked into the unit.
Failure to do so may damage your iPhone/iPod.
Charging Devices Via the USB Port
A 1 Amp USB port is located on the back of the unit for charging devices
while the unit is connected to AC power. Connect one end of a compatible
USB cable (not included) into the standard USB port on the unit and the
other end into the device you wish to charge. Some devices require higher
amperage USB charging ports. Monitor the charging status of your device.
If the device does not charge, you will need to use the charger that came
with your device.
Charging Your Apple Watch™ Via the Watch Charger
A magnetic charging stand for your Apple Watch™ is located on the right of
the unit. Place your watch on the charger with the watch face turned
upward until the battery indicator on the watch shows it is charged..