User's Manual

SETTING THE TIME:

TIME SYNC & MANUAL TIME SETTING

TIME SYNC

This unit is equipped with auto sync. By default, the unit will sync to the

time on your iPhone or iPod whenever you dock it in the Lightning dock.

When successful, the updated time will appear on the display. While the

dock accommodates most cases, you may need to remove your case for

proper docking. To manually sync at any time, press and release the Time

Sync Button. If sync is unsuccessful, try to sync again using a dierent

iPhone or iPod. If sync still doesn’t work, set the time manually (see

below).

SETTING THE TIME MANUALLY

1. Press and hold the Time Sync/Time Set Button until “SYNC” ﬂashes in the

display and a beep sounds. Press the + or – Buttons so “MANUAL”

appears in the display, indicating manual time setting mode.

2. Press and release the Time Sync Button. The TIME will ﬂash on the display.

Press the + or – Buttons to set the correct time (hold for rapid

adjustment). Make sure to set the correct AM or PM time. (The PM/AM

indicators appear to the left of the time display.)

NOTE: The display can be set to standard 12 hour time (AM and PM) or to

24 hour time. To toggle between 12 and 24 modes, press and release the

Alarm 1 or Alarm 2 Button located on top of the unit at any time

while display is ﬂashing during manual time setting mode.

3. Press and release the Time Sync/Time Set Button to conﬁrm the current

time setting. The YEAR will ﬂash on the display. Press the + or – Buttons to

set the correct year.

4. Press and release the Time Sync/Time Set Button to conﬁrm the current

year setting. The DATE will ﬂash on the display. Press the + or – Buttons to

set the correct month and day (hold for rapid adjustment).

5. Press and release the Time Sync/Time Set Button to conﬁrm the current

date setting. Two beeps will sound to indicate time setting mode is

complete.