User's Manual

BACKUP BATTERY

The iPLWBT5 ships with a CR2450 battery installed for backup to provide

continuous alarm operation and clock settings in the event of a power failure.

Remove the pull tab from the battery compartment on the bottom of the unit

before use. If a power failure occurs or the AC cord is accidentally

disconnected, the display backlight will not remain lit, but current time and

alarm time settings will be temporarily maintained. Otherwise, you must reset

the time and alarm settings.

Note: The Battery Low icon is located at the right side of clock display.

When the backup battery is low and needs to be replaced, the Battery

Low icon will ﬂash. To replace, follow steps below:

CONNECTING AC ADAPTER

This unit operates on AC power

using the included 100V-240V

universal AC adaptor. Place unit on

a stable surface. Plug the power

adaptor into the DC jack on back

of the unit and the other end into a

working wall socket. The Power

Button will glow red.

RESET

TEST