User's Manual

PAIRING AND LISTENING TO

BLUETOOTH DEVICES

Pairing is the set-up process to introduce your Bluetooth-capable device to the

iPLWBT5. Once your device is paired, the iPLWBT5 can recognize it and you

can play your audio through it.

1. Press and hold the Bluetooth Pairing Button located on the back of the

unit for 3 seconds. The Bluetooth icon will ﬂash and BLUETOOTH will appear

on the display and notes will sound indicating pairing mode.

2. “iHome iPLWBT5” will appear on your device’s Bluetooth menu. Select

“iHome iPLWBT5” to complete pairing.

If prompted for a passcode, enter

“1234” on your device’s keypad.

“Connected” or similar should appear on

your device.

Tones will sound and the Bluetooth icon will appear solid indicating the

iPLWBT5 is paired and ready to play music. If no device is successfully paired

within 3 minutes the unit will default to previous mode.

Once the unit is paired to a device, it will attempt to autolink when the

device is within range (about 33 feet)

Listening to Bluetooth Audio

1. Press and release the Power Button to turn on the unit, then press and

release the Mode Button as needed to cycle through BT, Dock, FM radio

and AUX modes.

2. When BT mode is selected, press the + or – Buttons to navigate to the

desired tracks Press and hold to search within the current track.

Adjust the volume on your BT device to maximum output.

4. Press the or Button on the unit to adjust the system volume. Press

the Button to pause Bluetooth audio, and again to unpause.

Using the Speakerphone

Unit must be ON and paired to a Bluetooth device to use Speakerphone mode.

1. When a call is received, playing music is muted to hear the ring tone and

“CALL” appears on the display. Press the Talk/End Call Button to answer the

call, or press and hold to reject the call. For call waiting function, press the

button again to answer a second call, and once more to return to the original

call. Press and hold to end the current call and return to a remaining call.

2. When a call is completed, press the Talk/End Call Button to end the call and

resume previous function.