User's Manual

Using the Alarms

Setting the Alarms

1. Press and hold the Alarm 1 or Alarm 2 Button for 2 seconds until the display flashes. Press the  or

Button to set the alarm time. Hold for a few seconds to advance or reverse rapidly. Remember to set the

correct AM or PM wake time.

2. Use Alarm 1 to wake to iPod or Bluetooth device. After setting the Alarm 1 wake time, press the Mode

Button to select wake to iPod or Bluetooth device. If your iPod or Bluetooth device has no sound for 20

seconds, the iP47 will switch to buzzer alarm automatically.

3. Use Alarm 2 to wake to the radio. After setting the Alarm 2 wake time, press a preset button (P1 to P4)

or use the Mode Button and Set Buttons to select a radio station to wake to (see Listening to Radio on page

6 for details on setting radio station and presets).

4. Press the Alarm 1 or Alarm 2 Button again or wait for 10 seconds. The alarm is now armed, indicated by

the numbered alarm clock icon.

NO MENTION OF BUZZER ALARM

Reviewing, Arming and Disarming Alarm (Turn Alarm Function On and Off)

1. Press the Alarm 1 or Alarm 2 Button once. The unit will show the current alarm time for alarm time review.

2. Arming or Disarming Alarm can be done by only press "alm on/off" button on the unit.

Resetting the Alarm to Come on the Next Day

1. When the alarm is sounding, press the Alarm Reset/Power Button to stop the alarm and reset it to come

on the following day at the same time.

Snooze

1. Press the Snooze/Dimmer Button after the alarm sounds. The alarm will be silenced and come on again 9

minutes later. Snooze can be pressed several times during the 1 hour alarm cycle.

Sure Alarm

The iP47 has a sure alarm feature so the buzzer alarm will still sound in the event of a power failure, if backup

battery is installed.