User's Manual

Pairing with a Different Device

When you power ON the unit, it will automatically link with the most recently connected Bluetooth device

as long as that device is still within range (approx. 30 feet). If no device is found within 3 minutes, the unit

will power down. To pair with a different device follow steps 1 - 4 under ”Pairing Your Device” on previous

page.

Playing Audio Via Bluetooth

1. Press the

Button to turn on the unit. The LED will glow blue when a linked device is in range and

detected. You can then listen to audio streamed wirelessly from your paired Bluetooth device.

2. Press the

Button to play audio from your device. Press again to pause play and once more to resume

play. When Bluetooth audio is active, the Bluetooth Button will glow solid white.

3. Press the

Button to advance to the next track; press – to go to the previous track. Use controls on your

Bluetooth device to search within tracks.

4. Press t

Button to adjust

the K4 volume. You can also adjust volume on your device.

5. When done listening,

press the

Button

to turn the unit OFF.

Remember to turn off your device

too.

6. Once powered off or switched to another mode (FM/Aux), Bluetooth will disconnect.

NOTE: Unit will power down if there is no linked Bluetooth device or aux-in audio detected within 15 minutes.

Pairing with a Different Device

Using the K4

presets