User's Manual

Setting and Using the Alarm (Continued)

4. Press the – or + Buttons to set the alarm schedule (‘WAKE 7 DAYS’ = the whole

week, ‘WAKE WEEKDAY’ = Monday through Friday, ‘WAKE WEEKEND’ =

Saturday and Sunday only).

Press the Alarm Button to confirm the alarm schedule setting. The wake-to source

will flash.

6. Press the – or + Buttons to select the desired wake to alarm source: Bluetooth,

radio or tone. The selected wake-up source will flash in the lower part of the

display.

Wake to Bluetooth: You will wake to the currently linked Bluetooth device. If no

device is detected, the alarm will default to Tone.

Wake to Radio: Press the Alarm Button to confirm. Press the Presets Button to select an FM preset

to wake to, or press the – or + Buttons to tune in a desired wake to station.

If FM antenna is not connected, the alarm will default to Tone.

Wake to Tone: Press the Alarm Button to confirm. Press the – or + Buttons as needed to listen to

and to select one of the four built-in wake-to tones (1 - 4).

7. Press the Alarm Button to confirm the alarm source. The volume display will flash.

8. Press the – or + Buttons to adjust the alarm volume. Note that the alarm volume setting is stored

separately from other volume settings.

9. Press the Alarm Button to confirm the alarm settings and exit alarm setting mode. 2 beeps will confirm

alarm setting is complete. The alarm icon will remain on the display, indicating the alarm is armed.

10. When alarm is sounding, press the Power Button or Alarm 1 or Alarm 2 Button to silence alarm and

reset it come on the next day at the same time (unless settings are changed).

Previewing the Alarm and Turning the Alarm On/Off

1. Press and release the Alarm Button to view the current alarm time.

2. Press and release the Alarm Button as needed to toggle the alarm ON and OFF, indicated by the alarm

icon and a beep.

Using the K4

presets