User's Manual

Pairing is the set-up process to introduce your Bluetooth-capable device to the K2. Once your

device is paired, the K2 can recognize it and you can play your audio through it.

1. Make sure your Bluetooth device is fully charged. Turn on your Bluetooth device and make

it “discoverable” by turning on Bluetooth mode (check in Options or Settings).

2. Press the Power Button to turn on the K2. The first time the unit is powered on, it will enter

auto-pairing mode and attempt to connect to a Bluetooth device. Otherwise, follow step 3

to begin pairing.

Press and hold the Bluetooth Button for 2 seconds. The pairing sound will play and the

Bluetooth Button will flash quickly, indicating the unit is in pairing mode.

P16

5. If pairing is successful, a tone will sound and the Bluetooth Button light will glow solid, indicating the K2

is ready to play music. There should also be an indication on your device. If no device is successfully

paired within 3 minutes the K2 will default to previous mode. Once the K2 is paired to a device, it will

attempt to autolink when the device is within range (about 30 feet).

Pairing Your Device Manually

4. “iHome Kineta K2” should appear in your device’s Bluetooth menu. If “Not Paired”, “Not Connected”

or similar message appears, select “iHome Kineta K2” to connect it. If prompted for a passcode, enter

“1234” on your device’s keypad.

For iPhone

iHome Kineta K2 iHome Kineta K2

iHome Kineta K2

For other

Using the K2