User's Manual

Playing Audio via Aux

Playing Audio Via Bluetooth

1. Move the Travel/Aux/Bluetooth Switch to the Bluetooth position to listen to audio streamed

wirelessly from your paired iPad, iPhone, iPod or other Bluetooth device.

2. Press and release the Button to turn on the unit. The amber light will flash as the unit

searches for a previously paired device, and then turn green when a previously paired

device is detected.

3. Press and release the Bluetooth/Speakerphone Button to play or pause audio from your

Bluetooth device. NOTE: Play/Pause only works in Bluetooth mode. It does not control aux

line-in devices.

4. Use the Volume +/- Buttons to adjust volume.

5. When done listening, press the Button to turn the unit off.

1. Move the Travel/Aux/Bluetooth Switch to the Aux position to listen to audio via aux

line-in.

2. Connect the micro USB plug to the micro USB charging port on the back of the right

speaker and connect the 3.5 mm audio plug to the headphone or line-out jack on your

audio device.

3. Press and release the Button to turn on the unit (release when green light appears).

4. Use the Volume +/- Buttons to adjust volume. You may wish to adjust the volume on your

audio device, too.

5. When done listening, press and release the Button to turn the unit off. Remember to turn

off your audio device, too.