User's Manual

Using Bluetooth: Pairing Your Device

NOTE: See the iDM15 Bluetooth Connection Guide for complete pairing details.

1. Move the Travel/Aux/Bluetooth Switch on the back of the right speaker to the Bluetooth

position (right).

2. Press and release the Button to turn on the unit (release when green light appears).

3. Turn on Bluetooth capability on your device and make it discoverable (see your device’s

instructions to add or setup a Bluetooth device).

4. Press and hold the Bluetooth/Speakerphone Button on the iDM15 until a blue light flashes

on the button and the unit beeps twice to indicate pairing attempt. The blue light will flash

while the unit attempts to pair. If your device asks for a password, enter 1234 on the

keyboard of your device.If no device is paired within 3 minutes, the Button will glow red

for 2 seconds and the unit will power off. If this occurs, retry steps 2-4.

5. Once paired with a device, the blue light will glow steadily, then turn green. There should

be an indication on your device that pairing is complete. On some devices, you must then

select “use as a stereo audio device” or similiar on the device’s Bluetooth menu. Once

paired, your device should link to the iDM15 whenever within range.