User's Manual

Unit doesn’t respond (no power)

Make sure unit is completely charged. Check that all connections are

correct and properly plugged in. Make sure your device is properly paired with the iDM15.

Trouble pairing device/computer with iDM15

Bluetooth implementation varies depending on your computer’s hardware and operating system.

Please see our website for updates on pairing.

• Make sure you have the latest firmware for your iPad, iPhone or iPod

(update via iTunes if needed).

• Make sure your device is working properly. Check your device’s manual for details on

Bluetooth pairing and linking.

For further information and to see the latest instructions, visit

www.ihomeaudio.com/support

Troubleshooting

Using the Speakerphone

1. Move the Travel/Aux/Bluetooth Switch to the Bluetooth position to use the speakers as a

speakerphone for a linked Bluetooth-capable phone during an incoming or active call. The

right speaker is muted during a speakerphone call; only the left speaker has audio.

2. Connect the micro USB plug to the micro USB charging port on the back of the unit and

connect the 3.5 mm audio plug to the headphone or line-out jack on your audio device.

Speakerphone cannot operate unless both speakers are connected.

3. Press and release the Button to turn on the unit (release when green light appears).

4. Use the Volume +/- Buttons to adjust volume. You may wish to adjust the volume on your

audio device, too.

5. When the call is completed, press the Button or Bluetooth/Speakerphone Button to end the

call and resume previous function.

P10