Operating instructions
Problem
I am unable
to
connect
the
iW3
to
my
home
Wi-
Fi
network.
I've selected
the
iW3 speaker
as
my
AirPlay audio source,
but
I
do
not
hear any music.
The iW3 doesn't respond
or
doesn't
turn
ON
.
Possible
Solutions
1.
Verify
that
your Wi-
Fi
network
is
functioning
and Wi-Fi certified.
2. The iW3 does
not
support
WEP
or
WPA/WPA2 Enterprise security
types.
We
recommend Open, WPA/WPA2 Personal. Once you
change
the
security
type
on
your
router,
we
suggest rebooting your
Wi-Fi router and
your
iW3 speaker.
3. Make sure
your
router firmware
is
up
to
date.
4. Make sure
that
your
wireless
network
is
not
on
a conflicting channel
with
one
of
your
neighbors.
You
can use software like
iS
tumbler
on
Mac
or
Netstumbler
on
Windows
to
verify
that
adjacent networks,
sorted
by
SNR
, aren't
on
the
same channel. Channels 1, 6, and
11
are
the
three
non
-overlapping 802.
11
g channels.
5. Move
the
iW3 closer
to
your
network
access
point
;
the
Wi
-
Fi
signal
is
weak
or
there are overlapping
Wi
-
Fi
signals
or
the
iW3
is
out
of
range
of
your
Wi
-
Fi
network
.
6.
Keep away
from
potential sources
of
interference
which
may affect
Wi-Fi signal, such
as
microwave ovens.
7. Reset the iW3 Hardware and repeat
network
setup:
- Using a paper clip, press
the
iW3 speaker
by
pressing
the
Reset
Button on
the
bottom
of
the
speaker
within
the
charging base
recess. The iW3
will
reboot and
power
ON
again.
- Repeat iW3
Wi
-
Fi
Network Setup process
if
necessary.
1.
Verify
that
the
volume
is
not
muted
or
set
to
0.
2. Verify
that
there is
not
another
iTunes library
or
iOS
device
connected
to
the
iW3 speaker.
3. Try restarting iTunes
or
your
iOS
device.
4. Reset
the
iW3
using
the
Reset
button
and reboot your
Wi
-
Fi
router.
1. Verify
that
the
adaptor
is
connected,
that
the
power
outlet
is
live
(not
controlled
by
a wall switch
),
and battery
is
fully charged.
2. Reset
the
iW3 speaker using a paper clip
to
press
the
Reset Button
located on
the
bottom
cabinet.