User's Manual

Rechargeable Lithium-ion Battery
iDM12 IB inside
324Wmm x 155Hmm
Print in Black color
Oct 25,2010
Battery charge (green) /
Bluetooth mode (amber)
indicator LED
Power Button
Turn Unit On and Off
TOP/FRONT VIEW
Volume Down
Button
Volume Up
Button
Mini USB to USB / 3.5mm Audio cable
Play/Pause/Pairing
Button
Press and hold to begin
Bluetooth pairing
BACK VIEW
Bluetooth / Aux select switch Mini USB charging port
Fold out
speaker stand
Step 1:Set up
Step 3:Using Bluetooth:
Pairing Your Device
Step 2:Charging the Unit
Step 4:Playing Audio
VIA BLUETOOTH
pairing
pairing
a) Grip the top and gently pull
away to separate it from
the main speaker unit. Pull
out the folding stand on the
back of the speaker unit to
keep it upright.
b) To use the top as an iPad
stand, fold out the feet.
c) Place stand on a flat, stable
surface. Dock iPad into
groove. For best
stability,dock iPad in
landscape mode.
USB 2.0
a) Connect the mini USB plug to the mini USB
charging port on the back of the unit.
b) Connect the standard USB plug end of the cable
to a power USB port on a computer or other
device.
c) A green light flashes while unit is
charging and glows steadily
when unit is fully charged.
NOTE:
When unit is not connected to power
source, flashing green light indicates
battery needs charging.
This device uses an internal rechargeable Lithium-ion battery that should last the lifetime of
the device. If you suspect your battery may be dead, try charging it several times. If the battery
does not recharge, please contact us for repair information. Please do NOT attempt to change
the battery yourself. If the battery has died and you do not want Manufacturer to replace your
battery, you should follow the disposal instructions below.
WARNING/DISPOSAL OF UNIT
Manufacturer to replace your battery, you should follow the disposal instructions below. not
want Manufacturer to replace your battery, you should follow the disposal instructions below:
• Never dispose of used batteries/electronics with ordinary solid wastes, since they contain
toxic substances.
• Always dispose of used batteries/electronics in accordance with the prevailing community
regulations that apply to the disposal of batteries/electronics. If there are no local regulations
concerning battery/electronics disposal, please dispose of the device in a waste bin for
electronic devices.
• Many electronics retailers now recycle batteries and other electronic components at no
charge. Check to see which ones in your area do so.
Using The iDM12
Not sure we need this section, may need more complete description of pairing and linking
Bluetooth devices.
a) Move the Bluetooth/Aux switch to the
Bluetooth position to listen to audio
streamed wirelessly from your iPad,
iPhone, iPod or other Bluetooth device.
b) Use Volume +/- Buttons to adjust
volume.
VIA AUX
a) Connect the mini USB plug to the mini
USB charging port on the back of the
unit and connect the 3.5 mm audio plug
to the headphone or line-out jack on
your device.
b) Move the Bluetooth/Aux switch to the
Aux position to listen to audio.
c) Use Volume +/- Buttons to adjust
volume.
a) Turn on Bluetooth capability on your
device and make it discoverable (see
your device’s instructions).
b) Press and hold the Play/Pause/Pairing
Button on the iDM12 until an amber light
flashes on front of the unit.
c) Once paired with a device, the amber
light will glow steadily. There should be
an indication on your device that pairing
is complete. Once paired, your device
should link to the iDM12 whenever it
comes into range. See Step 4 to Play
Bluetooth audio.