User's Manual

Use Bluetooth mode to listen to audio streamed wirelessly from your paired iPad, iPhone, iPod
or other Bluetooth device.
1. Press and hold the Button to turn on the unit in Bluetooth mode. The Button light will
flash as the unit searches for a previously paired device, then turn solid when a previously
paired device is detected. (If unit is already ON, press the Mode Button to toggle the unit
between iPod/Aux-in audio mode and Bluetooth mode (the Button is lit in Bluetooth mode).
2. Press and release the Play/Pause/Pairing Button to play or pause audio from your
Bluetooth device.
NOTE: Play/Pause only controls connected Bluetooth or docked iPad, iPhone or iPod devices.
It does not control aux line-in devices.
3. Use the Volume +/- Buttons to adjust volume.
4. When done listening, press and hold the Button for 2 seconds to turn the unit off.
You can use the unit as a speakerphone for a linked Bluetooth-capable phone during an incoming or
active call. To make a call, dial your phone as usual. To redial the last number called (on phones that
support the feature), press the Button on the unit twice.
1. The Button will flash red and the Button will flash green during an incoming call. When a
call is received, playing music is muted to hear the ring tone.
2. Press the Button to answer the call, or press the Button to ignore it. Use the same controls for
call waiting: press the Button to answer and switch between calls, or press the Button to
ignore a new call.
3. Use the Volume +/- Buttons to adjust speaker volume.
4. When the call is completed, press the Button to end the call and resume previous function.
Playing Audio Via Bluetooth
Using the Speakerphone
6