User's Manual

Troubleshooting

Unit doesn’t respond (no power)

• Check that all connections are correct and properly plugged in. If operating on batteries, make sure

batteries are fresh and are properly installed.

Resetting the unit

If the unit does not respond properly or appears to be “frozen”, you may wish to try resetting it. To do so,

press and hold the + and – Buttons at the same time for 8 seconds until the unit makes a long beep.

Note: Resetting the unit you erase all current settings. You will have to re-pair any Bluetooth devices.

• Make sure you have the latest firmware for your iPad, iPhone or iPod (update via iTunes if needed).

• Make sure your device is working properly.

For further information and to see the latest instructions,visit www.ihomeaudio.com/support

1. Remove any docked device from the unit.

2. Press gently on the Retracting Dock to store it inside the body of the unit.

3. Place your device sideways in the dock area resting against the back rest.

4. For Aux-in audio: Connect audio cable to the device’s headphone jack to the aux in jack on

the back of the unit, and press and release the Mode Button to access Aux-in mode (make

sure the Button is not lit,indicating iPod/Aux-in mode.

For Bluetooth Audio: Press and hold the Button for 2 seconds to place unit in Bluetooth

mode if unit is off, or press and release the Mode Button to toggle to Bluetooth mode (make

sure the Button is lit,indicating Bluetooth mode.

5. Play the video on your device.

6. Use the Volume +/- Buttons to adjust volume.

7. When done listening, press the Button to turn the unit off.

Watching Videos in Landscape Mode