User's Manual

Using the iBT9

Charging Devices via USB Port

Note: The unit must be powered ON and operating on internal battery (not connected to AC adaptor) to

begin charging a device via the USB Port. To charge devices via USB, we recommend that the unit be

fully charged first. The iBT9 will not charge external devices via USB when internal rechargeable

battery is too low (battery indicator is blinking). While the unit will automatically power off after 15

minutes if no audio is detected (to save battery power), it will continue to charge your device via USB

for up to 1 hour when powered off.

1. Lift waterproof cover located on the right side of the unit to expose the USB Charging Port.

2. Connect the standard size end of a USB cable (not included) to the USB Port and connect the other end

to the charging port on your device.

3. Press and hold the Power Button on the unit for 2 seconds to turn it on.

4. Monitor charging on your device. If your device does not charge, you must charge your device using the

charger that came with it.

usb out

1.0 amp

usb in

reset

aux-in