User's Manual

The iBT562 is powered by a rechargeable battery in each speaker.
MAKE SURE TO CHARGE EACH SPEAKER BEFORE USE
• Connect a micro-USB plug on one of the included charging cables to the
USB Charging Jack on one speaker. Repeat for the remaining speaker.
• Connect each charging cable to a powered USB port, such as that on a
computer or USB AC adapter. The computer or USB AC adapter should
be connected to a wall outlet when speaker is charging. The Charging
LED on each speaker will turn solid red while charging and turn o when
fully charged.
• If the LED flashes red, or you notice sound distortion at higher volumes, or
there is no sound at all, it's time to recharge the battery.
Each iBT562 speaker is pre-synced to the other at the factory for True
Wireless Stereo (TWS) operation. You just need to turn both speakers on
within 10 seconds to establish a TWS link. An audio prompt will identify each
channel, and the unit will enter pairing mode.
Note: Once speakers are linked, powering o one speaker will also turn the
other speaker o.
If speakers are taken out of TWS range (about 16 feet), the link between
speakers may fail.
• Once TWS link is established, the Bluetooth indicator will flash blue and
pairing tones will sound
Select “iHome iBT562” on the device’s Bluetooth menu. If prompted, enter
pass code 1234.
• The Bluetooth indicator will glow solid, indicating pairing is successful. You
are now ready to stream your audio. Control and navigate tracks on your
Bluetooth device. Press the – /+ Buttons to control volume. Once the
iBT562 is paired it will attempt to autolink when the device is within
Bluetooth range (about 33 feet).
To reset/clear Bluetooth, press and hold the Bluetooth Button for 10
seconds.
Note: To save battery power, the unit will power o automatically after 15
minutes with no audio.
Manual Bluetooth Pairing
To pair manually, power on each speaker, then press and hold the
Bluetooth Button located on the back of the left speaker. Select “iHome
iBT562” on the device’s Bluetooth menu.
Pairing with a Single Speaker (Mono Operation)
To use a single speaker, just turn one on instead of both. To use both
speakers separately, place each outside TWS range (16 feet) then turn on
and pair each speaker separately with a dierent device. When separately
paired speakers are returned within TWS range, each will maintain separate
pairing unless one is powered o then powered back on, in which case it will
attempt TWS linking.
The speaker must be on and connected to a paired Bluetooth phone to
receive calls. When a call comes in, any playing audio is paused, the Status
LED will flash blue 2X and the ringtone associated with the caller may
sound, depending on Bluetooth device.
• Press the Phone Button to answer or end a call.
• Press and hold to ignore a call.
OR
USB AC adaptor
(not included)
2 USB charging cables included
LEFT SPEAKER RIGHT SPEAKER
Press Power Button
to turn speaker(s) ON
Press the Power Button on each speaker within
10 seconds to establish True Wireless link.
The GREEN True Wireless indicator on front of each
speaker will flash green then turn solid and each
speaker will announce a channel identity when the
2 speakers are linked.
The unit will then enter autopairing mode, or search
for a previously paired Bluetooth device.
THE FIRST TIME THE UNIT IS POWERED ON
Once the TWS link is established, the speakers
enter auto pairing mode, indicated by tones
and the Bluetooth indicator flashing BLUE.
MANUAL PAIRING/PAIRING SPEAKERS SEPARATELY (MONO)
To pair speakers after first power on or to pair separately
Select “iHome iBT562” on your
device’s Bluetooth menu to complete
pairing.
SPEAKERPHONE MODE
(Left Speaker only)
Press to answer and end calls
Press and hold to ignore calls
3 Sec
10 Sec
Computer USB port
reset
reset
True Wireless and Bluetooth
Charging the iBT562
Using the iBT562 Speakerphone Mode
+
1
CHARGE EACH SPEAKER BEFORE USE
2
3
GETTING STARTED: TRUE WIRELESS
BLUETOOTH MODE
Press and hold Bluetooth
Button on left speaker
“Left
channel”
“Right
channel”
Flashing RED = low battery
Solid RED = charging
O = fully charged
Charging Indicator LED
Flashing BLUE = pairing
Solid BLUE = paired
Bluetooth Indicator LED
True Wireless range
about 16 feet
iHome iBT562
iHome iBT562
Select “iHome iBT562”
Adjust Volume
(turn up your
device first)