User's Manual
(Front)
iBT52
Instruction manual
Meet Your iBT52
iBT52 Home Docking Station
iBT52 Bluetooth Receiver
Introduction
Thank you for purchasing the iHome iBT52. This product is designed to provide
high quality wireless sound and speakerphone capability to audio devices
equipped with line-in jacks, and to headphones.
Along with the included Quick Bluetooth Connection Guide this instruction booklet
explains the basic operation and care of the unit. Please read them carefully and
keep for future reference.
Maintenance
• Keep unit away from sources of excessive heat.
• Clean your unit with a soft cloth moistened only with mild soap and water.
Stronger cleaning agents, such as thinner or similar materials can damage the
surface of the unit.
Incl
uded
• iBT52 Bluetooth receiver system
(Bluetooth Receiver + docking station with USB + audio cable)
• iBT52 Home Docking Station (with attached Aux + Micro USB cable)
• USB Wall Adaptor
Using the USB Wall Adaptor
1. Gently connect the Bluetooth Receiver to the Docking Station’s micro USB plug
and audio plug by sliding the Receiver onto the plugs.
2. Connect the standard USB plug of the Docking Station into the USB Wall
Adaptor.
3. Plug the USB Wall Adaptor into a working wall outlet. For first time use, charge
unit for about 3 hours.
Using other USB Power Source
1. Gently connect the Bluetooth Receiver to the Docking Station’s micro USB plug
and audio plug by sliding the Receiver onto the plugs.
2. Connect the standard USB plug of the Docking Station into a power USB port
on a computer or other USB charging device. For first time use, charge unit for
about 3 hours.
The iH Button/ Indicator Light on the front of the Bluetooth Receiver glows red
steadily while the unit is charging and turns OFF once the unit is fully charged.
If unit is not powered on is connected to USB power, the red light glows
steadily to indicate unit is charging.
NOTE: When the unit is on and not connected to a power source, the iH Button/
Indicator Light flashing red means the battery needs charging.
Portable USB
Bluetooth Receiver
Top
Front
FrontSide
Side
Micro USB Charging Port Aux-out Jack
Micro USB
Plug
Audio Plug
Sport Clip
Backlit Pairing/Operation
Button with Indicator Light
iBT52 IB (Eng) US ver.
Size: 300mm x 260mm
Printing color: 1C +1C (Black)
Apr 16, 2013
This device complies with Part 15 of the FCC Rules, operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
FCC Information
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
This Device complies with RSS-102 of the IC Rules; Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
• Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada
FCC ID: EMOIBT52
IC: 986B-IBT52
Cet appareil répond aux exigences du paragraphe 15 de la loi de la Commission
Fédérale sur les Communications. L’utilisation de cet appareil doit répondre aux
deux conditions suivantes: (1) Cet appareil ne doit pas provoquer d’interférences
nuisibles, et (2) cet appareil doit accepter toutes les interférences reçues, y compris
les interférences pouvant provoquer un fonctionnement non désiré.
Information FCC
FDéclaration de la FCC sur l’exposition aux radiations
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5
de RSS 102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir
l'information canadienne sur l'exposition et la conformité de rf.
Avertissement : Tout changement ou modification apporté à cet appareil sans le
consentement expresse de la partie responsable pour la conformité peut annuler le droit
de l'utilisateur d'utiliser cet appareil.
Remarque : Cet équipement a été testé et jugé conforme aux limitations pour un appareil
numérique de Classe B, selon la Section 15 de la règlementation FCC.
Ces limites sont conçues pour fournir une protection raisonnable contre les interférences
nuisibles dans une installation résidentielle. Cet équipement génère, utilise et peut
émettre des fréquences radio et, s'il n'est pas installé et utilisé selon les instructions, peut
causer des interférences nuisibles aux communications radio.
Cependant, il n'existe aucune garantie que des interférences ne se produiront pas dans
une installation particulière. Si cet équipement produit des interférences nuisibles sur la
réception de la radio ou de la télévision, ce que vous pouvez facilement constater en
éteignant et en rallumant l'équipement, nous vous encourageons à prendre l'une ou
plusieurs des mesures correctives suivantes :
• Réorienter ou déplacer l’antenne réceptrice,
• Éloigner davantage l'appareil du récepteur.
• Branchez l’équipement sur une prise ou un circuit auquel le récepteur n’est pas
branché.
• Consultez votre revendeur ou un technicien radio/télévision qualifié pour plus
d’informations.
ppareils digitaux de Classe B compatible avec l’ICES-003 Canadien.
FCC ID: EMOIBT52
IC: 986B-IBT52
USB 2.0
Using the USB Wall Adaptor Using the USB Power Source