User's Manual

iBT44

Using the

P10

Pairing with a Different Device

When you power ON the speaker, it will automatically link with the previously paired Bluetooth device

as long as that device is still within range (about 30 feet). To pair with a different device you must turn

off the Bluetooth capability of the already paired device.

Playing Audio Via Bluetooth

1. Press the Power Button to turn on the unit in the last active mode. If needed, press the

Button to enter Bluetooth mode. The blue light on the Bluetooth Button will flash and a tone will sound

as the unit searches for a previously paired device, and then turn solid blue once a previously paired

device is detected.

2. Press the Play Pause Button on the unit to play audio from your linked Bluetooth device. While

audio is playing, press to pause play, and again to resume play.

3. Use the controls on your device to navigate tracks, etc.

4. Turn the Volume Knob to control the system volume.

5. When done listening, press the Power Button to turn the unit off. Remember to tun off your audio

device, too.

TIP: In Bluetooth mode, turn the Tuning Knob to adjust the brightness on the display.