User's Manual

iBT4

Using the

Pairing with a Different Device

When you power ON the speaker, it will automatically link with the previously paired Bluetooth device

as long as that device is still within range (about 30 feet). To pair with a different device you must turn

off the Bluetooth capability of the already paired device.

Playing Audio Via Bluetooth

1. Turn the Power/Mode Dial to the Bluetooth position (right) to enter Bluetooth mode. The Bluetooth

Indicator on the display will flash and a tone will sound as the unit searches for a previously paired

device, and then turn solid once a previously paired device is detected.

2. Press the Pairing/Play Pause Button on the unit to play audio from your linked Bluetooth device.

While audio is playing, press to pause play, and again to resume play.

3. Press the or Buttons on the unit to go to the previous or next track. Press and hold briefly to scan

backward or forward within tracks.

4. Turn the Volume Dial to control the system volume.

5. When done listening, turn the Power/Mode Dial to the OFF position (left) to turn the unit off.

Remember to tun off your audio device, too.