User's Manual

iBT4

Using the

Using Bluetooth: Pairing Your Device

1. Turn on your Bluetooth-enabled device and turn on Bluetooth capability as described in the device’s

user manual.

2. Turn the Power/Mode Dial right to turn the unit ON (pairing is available in any mode).

3. Press and hold the Pairing/Play Pause Button on the unit for 2 seconds to begin

pairing the unit with your device. “PAIR” will flash on the display, indicating pairing attempt.

“iHome iBT4” should appear on your device’s menu. If “Not Connected” or similar message appears,

select “iHome iBT4” on the device to connect it. If your device asks for a password, enter 1234 or

0000 on the keyboard of your device. If no device is paired within 2 minutes, a tone will sound and

the unit will revert to its previous mode. To retry pairing, turn the Power/Mode Dial to the OFF position

(left) then follow steps 2 & 3 again.

Once paired with a device, the

PAIR indicator on the display will stop flashing then disappear and

the Bluetooth icon will remain.

On some devices, you must then select “Use as Audio Device” or similar

on the device’s Bluetooth menu. Once paired, your device should link to the iBT4 whenever within

range (about 30 feet).

NOTE: The unit can auto-link with up to 3 previously paired devices.