User's Manual

Resetting the Unit

If the unit “locks up” or becomes unresponsive, you can reset it to factory settings.

To do so, press and hold the Button and the Button TOGETHER for 8 SECONDS.

A long beep will sound, indicating the unit has been reset. Note that you will need to re-pair

Bluetooth devices.

Note: There is also a Reset port in the back of the unit. Insert the end of a paper clip or similar

and hold briefly. A tone will indicate the unit has reset. Bluetooth links will remain intact.

iBT4

Using the

P12

Reset the iBT4 by using a

paper clip to press the reset button

Reset port