User's Manual

Unit doesn’t respond (no power)

• Make sure unit is completely charged.

• Check that all connections are correct and properly plugged in.

• Make sure your device is properly paired with the iBT32.

• Make sure the unit is ON.

Unit doesn’t respond (locked up/ “frozen”)

If the unit does not respond, try disconnecting it from power source. Insert a paperclip or similar into the

Reset port located on the bottom of the unit for about 10 seconds.

Trouble pairing device/computer with iBT32

Bluetooth implementation varies depending on your device’s hardware and operating system. Please see

our website for updates on pairing.

• When you power ON the speaker, it will automatically link with the last previously paired Bluetooth

device if the device is still within range (approx. 30 feet). To pair with a different device you must turn

off Bluetooth capability on the already paired device, or take it out of range.

• If your device does not auto-link when within range, re-pair the device. To do so, first delete the iBT32

from your Bluetooth devices menu.

• Make sure your device is working properly. Check your device’s manual for details on Bluetooth pairing

and linking.

For further information and to see the latest instructions, visit www.ihome.com/support

Troubleshooting

P15