User's Manual

Charging Devices via USB Port
Note: When operating on internal battery, the unit must be powered ON to charge devices via the USB
Port. The iBT32 will charge devices when connected to USB power via the micro USB power in
port OR when operating on the internal battery (provided the battery has enough charge). To
charge devices via USB while operating on the internal battery, we recommend that the unit be
fully charged first. The iBT32 will not charge external devices via USB when internal rechargeable
battery is too low (single indicator is blinking or no indicator). To save battery power, USB charging
is limited to 1 hour when no audio is playing.
1. Lift water resistant seal located on the bottom of the unit to expose the USB Port.
2. Connect the standard size end of a USB cable (not included) to the USB Port and connect the other
end to the charging port on your device.
3. Press and hold the Power Button on the unit to turn it on.
4. Monitor the charging on your device. If your device does not charge, you must charge your device
using the charger that came with it.
10
P11
Using the iBT32