User's Manual

Pairing is the set-up process to introduce your Bluetooth-capable device to the iBT3. Once your device is
paired, the iBT3 can recognize it and you can play your audio through it.
1. Make sure your Bluetooth device is fully charged. Turn on your Bluetooth device and make
it “discoverable” by turning on Bluetooth mode (check in Options or Settings).
2. Press and hold the
Power Button for 2-4 seconds to turn on the iBT3. The first time the
unit is powered on, it will enter auto-pairing mode and attempt to connect to a Bluetooth
device. Otherwise, follow step 3 to begin pairing.
3. Press and hold the Talk/Pairing/Play/Pause Button on the right of the unit for 2 seconds.
The unit will beep twice and the status indicator LED will flash blue, indicating the unit is in
pairing mode.
4.
“iHome iBT3” should appear in your device’s Bluetooth menu. If “Not Paired”, “Not Connected” or similar
message appears, select “iHome iBT3” to connect it. If prompted for a passcode, enter “1234” on your
device’s keypad.
iBT3
Using the
6
P9
For iPhone
For other
iHome iBT3
iHome iBT3
iHome iBT3
iHome iBT3
5. If pairing is successful, 2 beeps will sound and the Bluetooth indicator light will glow solid, indicating
the iBT3 is ready to play music. There should also be an indication on your device. If no device is
successfully paired within 3 minutes the iBT3 will default to previous mode. Once the iBT3 is paired to
a device, it will attempt to autolink when the device is within range (about 30 feet).
Pairing Your Device