User's Manual

P10

Snooze/Display Dimmer Button

1. To program Snooze, press and hold the Snooze/Display Dimmer Bar located at the top

rear of the cabinet during normal operation (when no alarm is sounding) for 3 seconds.

2. Press the

– or + Buttons to select the desired snooze time (between 01 and 29 minutes).

3. Press and release the Snooze/Display Dimmer Bar to confirm Snooze setting.

2 beeps will sound.

• While the alarm is sounding, press and release the Snooze/Display Dimmer Bar to

temporarily silence the alarm for the set duration (9 minutes is the default). Snooze can

be used several times during the one hour alarm cycle.

• To adjust the brightness of the display, press and release the Snooze/Display Dimmer

Bar during normal operation (when no alarm is sounding) to cycle through the brightness

display settings, including OFF.

Sleep Mode

This unit allows you to sleep to the current sound source for a set time before turning

the unit off. (Sleep mode can be customized using the free iHome Enhance app.)

1. To set Sleep time, press and release the Sleep Button as needed to cycle to the desired

sleep duration:120, 90, 60, 30 or 15 minutes or OFF (turns the unit off). The sleep icon

will appear on the display.

2. Press the or Buttons to adjust the sleep volume on the unit. Note that the sleep

volume setting is stored separately from other volume settings.

FM Radio

Extend the FM antenna for best reception.

1. Press and release the Mode Button as needed until the FM indicator icon and current

FM radio frequency appear on the display.

2. Press the

– or + Buttons to tune the radio to the desired station (hold to scan for the

next clear station).

3. Press the

Buttons to adjust the volume on the unit.

When you are through listening, press the Power Button to turn the unit off.

Using the

iBT297